Try to learn something about everything, and everything about somethingThomas Huxley “Darwin's bulldog” (1824-1895)

Trace:

You are here: Make It Tea » Public Area » Make It Tea Blog » My New 30m CW QRP TX is finished

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
public:blog:new_tx_finished [25/07/26 15:38 BST] – created johnpublic:blog:new_tx_finished [25/07/26 15:41 BST] (current) – [Final Build] john
Line 4: Line 4:
  
  
-This is re-using the same PA strip as the [[qrss_tx|MEPT]]. I've changed the Arduino code and added a rotary encoder and LCD.+This new TX is re-using PA strip I tried in the [[..:radio:topics:arduino:qrss_tx|]] I've changed the Arduino code and added a rotary encoder and LCD.
  
 ==== Basic Architecture ==== ==== Basic Architecture ====
Line 33: Line 33:
 {{:public:radio:img_20260724_220944.jpg?direct&400|}} {{:public:radio:img_20260724_220944.jpg?direct&400|}}
  
 +{{:public:blog:img_20260725_100129.jpg?direct&400|}}
  
 And here it is, finished and incorporated into the shack And here it is, finished and incorporated into the shack
Line 53: Line 54:
 ===== Separate TX and RX ===== ===== Separate TX and RX =====
  
-I considered making a transceiver by putting the phasing RX [[30m_phasing_rx|]] and this TX together in one box, with a single Arduino / SI5351 but I decided to keep them totally separate. This harks back to an earlier time when this was a common way of operating. There is much more versatility from this approach.+I considered making a transceiver by putting the phasing RX [[..:radio:topics:arduino:30m_phasing_rx|]] and this TX together in one box, with a single Arduino / SI5351 but I decided to keep them totally separate. This harks back to an earlier time when this was a common way of operating. There is much more versatility from this approach.