Differences

This shows you the differences between two versions of the page.

--- public:radio:2024:allstar [08/04/24 00:39 BST] – [It's alive] john
+++ public:radio:2024:allstar [06/03/25 06:49 GMT] (current) – external edit 127.0.0.1
@@ Line 15: / Line 15: @@
 |Radio|FT-8900|
 |Frequency|144.9125 MHz|
-|Monitor|[[http://gm4slv.plus.com:42111/allmon2/link.php?nodes=48148|Allmon2]]|
+|Monitor|[[http://gm4slv.plus.com:42111/supermon/link.php?nodes=48148|Supermon]]|
 |AllStar | [[http://stats.allstarlink.org/stats/48148]]|
@@ Line 57: / Line 57: @@
 ==== Next Steps ====
-  * Add my own user (don't want to use the built in ''repeater'' user
+  * Add my own user (don't want to use the built in ''repeater'' user)
   * Add myself to the necessary groups (sudo etc.)
+  * change the hostname from ''repeater'' -> ''asterisk''
+    * remember to edit ''/etc/hosts'' as well as ''/etc/hostname''
+  * set timezone to ''Europe/London''
   * Check the RX/TX levels/deviation with ''/usr/sbin/simpleusb-tune-menu '' - the levels were spot on due to using the same setup, and the same config. files as the previous incarnation.
   * Enable Echolink by editing ''/etc/asterisk/modules.conf'' to load the Echolink Module (last time I'd disabled it)
@@ Line 68: / Line 71: @@
   * All working...!
-=== First QSO ===
+==== First QSO ====
  * I was called on Echolink by ''G0RAS'' while I was out walking the dogs. We had a good chat, so that was a good test that it's all working