Differences

This shows you the differences between two versions of the page.

--- public:radio:2025:allstar_expands [06/06/25 17:44 BST] – [Port Forwarding] john
+++ public:radio:2025:allstar_expands [06/06/25 21:10 BST] (current) – [Test Node] john
@@ Line 122: / Line 122: @@
 To automate the process the update is done nightly via ''/etc/cron.daily/allstar_helpers'' which was modified to point to the correct version of ''astdb.php''
-<code>
+<code bash>
 #!/bin/bash
@@ Line 135: / Line 135: @@
 ++++ Generic /var/www/html/supermon/allmon.ini |
-<code>
+<code bash>
 [All Nodes]
 nodes = 481480,481481,481482,1399
@@ Line 1480: / Line 1480: @@
 |Dashboard| http://gm4slv.plus.com:42111/|
-This one is for linking the others together, and running DVSwitch to bridge to (at the moment) TGIF TG2354429 (my //ID Talkgroup//)
+This one is for running DVSwitch to bridge to (at the moment) TGIF TG2354429 (my so-called //ID Talkgroup// )
 I added the DVSwitch software, in the same way described here [[gm4slv_allstar_2025|]] and decided to bridge to ''TGIF'' instead of Brandmeister.
@@ Line 2660: / Line 2660: @@
 #includeifexists custom/iax.conf
+</code>
+++++
+++++ /etc/asterisk/echolink.conf |
+<code>
+[el0]
+call = GM4SLV-L                          ; Change this!
+pwd = XXXXXXX                          ; Change this!
+name = John                        ; Change this!
+qth = Allstar 481480                           ; Change this!
+email = gm4slv@gm4slv.plus.com                         ; Change this!
+node = 886089                           ; Change this!
+; Data for EchoLink Status Page
+lat = 60.2883                               ; Latitude in decimal degrees
+lon = -001.42533                               ; Longitude in decimal degrees
+freq = 144.9125                             ; not mandatory Frequency in MHz
+tone = 0                              ; not mandatory CTCSS Tone (0 for none)
+power = 2                               ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W, 9=81W (Power in Watts)
+height = 0                              ; 0=10 1=20 2=40 3=80 4=160 5=320 6=640 7=1280 8=2560 9=5120 (AMSL in Feet)
+gain = 0                                ; Gain in db (0-9)
+dir = 0                                 ; 0=omni 1=45deg 2=90deg 3=135deg 4=180deg 5=225deg 6=270deg 7=315deg 8=360deg (Direction)
+maxstns = 5                            ; Max Stations
+rtcptimeout = 10
+recfile = /tmp/echolink_recorded.gsm    ;
+astnode = 481480           ; Change this!
+context = radio-secure                  ; Default in code is echolink-in
+; Max 3 servers
+server1 = server1.echolink.org
+server2 = server2.echolink.org
+server3 = server3.echolink.org
+; To deny w6xxx you would add the statement: deny = w6xxx
+; To prohibit computer-based connections you would write: permit = *-*
+; To allow access to only a select group of callsigns: permit = w6abc,w6def,...
+; permit                                ; comma delimited list of callsign, type (-r)
+; deny
+; Remote text commands thru netcat:
+; o.conip <IPaddress>    (request a connect)
+; o.dconip <IPaddress>   (request a disconnect)
+; o.rec                  (turn on/off recording)
+; ipaddr
+; port
+#includeifexists custom/echolink.conf
 </code>
@@ Line 2674: / Line 2728: @@
 This one is to use for tests and experiments....
-FIXME
+<note>
+Experiment 1
+Friday 6th June 2025
+Make a 2nd DMR Bridge to monitor DVSPh TG733 "MilNet"
+</note>
+  * Made a new private node ''1398''
+  * Connect ''481482'' to internal private ''1398''
+  * Set up DVSwitch MMDVM_Bridge & Analog_Bridge
+    * MMDVM set to use Hotspot ID ''235442998''
+    * Options=StartRef=4000;RelinkTime=0;UserLink=0;TS1_1=733;
+  * Connected MMDVM_Bridge to DVS_Ph F server - linked to TG733
+  * Main VHF Gateway Node ''481481'' connected to Test Node ''481482'' in "Monitor" mode.
 --- //John Pumford-Green 05/06/25 22:30 BST//