Differences

This shows you the differences between two versions of the page.

--- public:radio:2025:gm4slv_allstar_2025 [03/06/25 18:57 BST] – [Allmon2 / supermon] john
+++ public:radio:2025:gm4slv_allstar_2025 [06/06/25 12:21 BST] (current) – [GM4SLV Allstar 2025] john
@@ Line 6: / Line 6: @@
 ** New explorations into Allstar and Bridging **
+<note tip>
+This was an initial experiment, I've used what I learned to set up a bigger system (still under development) and described here : [[allstar_expands|]]
+</note>
 ===== Hardware =====
@@ Line 22: / Line 27: @@
 Instructions here: {{ :public:radio:asl-to-dmr-bridge.pdf | ASL to DMR Bridge}}
+The first part is easy, modifying a working Allstar node to add the private node and the USRP channel driver that will be used for the connection to the bridging.
 ==== My configs ====
@@ Line 724: / Line 730: @@
 ++++ /etc/asterisk/rpt.conf after bridging added |
-<code>
+<code bash>
 ; Radio Repeater configuration file (for use with app_rpt)
@@ Line 1448: / Line 1454: @@
 ++++ /etc/asterisk/modules.conf after bridging added |
-<code>
+<code bash>
 ;
 ; Asterisk configuration file
@@ Line 1669: / Line 1675: @@
 ++++ /etc/asterisk/extensions.conf after bridging added |
-<code>
+<code bash>
 [general]
@@ Line 1828: / Line 1834: @@
 ++++
+The next bit was more tricky on an old Debian ''Buster'' ASL Beta image that hadn't been updated/upgraded in a long time....
 ==== Installing DVswitch ====
@@ Line 1873: / Line 1881: @@
 ''/etc/asterisk/rpt.conf''
-<code>
+<code php>
 [1999]
 rxchannel = USRP/127.0.0.1:34001:31001
@@ Line 1881: / Line 1889: @@
 and setting ''Analog_Bridge.ini'' to match:
-<code>
+<code php>
 [USRP]
 address = 127.0.0.1
@@ Line 1994: / Line 2002: @@
-{{tag>}}
+{{tag>radio allstar mmdvm dvswitch}}