Differences

This shows you the differences between two versions of the page.

--- public:radio:svxlink [02/07/22 15:44 BST] – john
+++ public:radio:svxlink [26/04/23 14:51 BST] (current) – removed john
@@ Line 1: / Line 1: @@
-<-[[.:]]
-====== SVXLink : Install from source ======
-===70cm Simplex Gateway MB7AZE===
-SVXLink installed on Raspberry Pi - compiled from author's Git repository.
-VOIP networking is achieved using the SVXReflector protocol connecting to a reflector
-server run by Chris G4NAB. This connects SVXLink systems together and provides "Talkgroups"
-in a similar manner to DMR. There is a web portal to observe the network in real time here:
-[[http://svxportal-uk.ddns.net:81/index.php]]
-{{:public:radio:screenshot_2022-05-03_22.07.17.png?600|}}
-===== install a current version of SVXLink =====
-==== Get current Git version ====
-''git clone https://github.com/sm0svx/svxlink.git''
-==== Install Dependencies ====
-A lot of dependencies are required, and not all of them are obvious from the INSTALL doc in
-the source, needing a few iterations of running ''cmake -DUSE_QT=no .. '' and then installing whatever
-package is highlighted as //missing//. This might need repeating several times to grab everything required, and to successfully complete the ''cmake'' phase.
-Eventually everything is installed allowing the SVXlink package to be configured
-and built.
-==== Configure ====
-When configuring with ''cmake'' I used a command line switch '' -DUSE_QT=no'' to avoid QT dependencies and building QTel client :
-<code bash>
-cd svxlink/src
-mkdir build
-cd build
-cmake -DUSE_QT=no ..
-make
-sudo make install
-ldconfig
-</code>
-Later to update to latest version from GIT
-<code bash>
-cd svxlink
-git pull
-cd src/build
-make
-sudo make install
-sudo ldconfig
-</code>
-===== Running Svlink =====
-Start SVXLINK from script in home directory
-''svx_ref.sh''
-<code bash>
-#!/bin/bash
-CFG=/usr/local/etc/svxlink/svxlink.conf
-LOG=/home/gm4slv/svxlink.log
-sudo killall svxlink
-sudo killall svxlink
-sudo killall svxlink
-sudo svxlink --daemon --logfile=$LOG --config=$CFG
-exit 0
-</code>
-Probably need up to date sound files, with the additional items needed for reflector use:
-[[https://github.com/sm0svx/svxlink-sounds-en_US-heather/releases]]
-===== Configuration file =====
-[[mb7azeconf|svxlink.conf]]
-===== Crontab =====
-=== to start at reboot===
-''@reboot sleep 30 && sudo -u gm4slv /home/gm4slv/svx_ref.sh >/dev/null 2>&1''
- //[[gm4slv@gm4slv.plus.com|John Pumford-Green]] Tue May  3 20:56:09 2022//#
-Page Updated : ~~LASTMOD~~
-{{tag>svxlink mb7aze radio}}