Differences

This shows you the differences between two versions of the page.

--- public:radio:xgate [15/06/22 10:40 BST] – [VHF / HF X-Gate Project] john
+++ public:radio:xgate [26/04/23 14:54 BST] (current) – removed john
@@ Line 1: / Line 1: @@
-<-[[.:]]
-====== VHF / HF X-Gate Project ======
-  * my interpretation of the [[https://www.barrettcommunications.com.au/2062-crossgate/|Barrett Radio 2062 Crossgate]]
-  * HF port has syllabic squelch for better detection of SSB speech signals
-  * VHF port has DTMF decoder for control commands
-  * Raspberry Pi running a Python application handles control of HF radio via NMEA and of talkthrough functions etc. via GPIO
-  * DTMF commands for control of Icom IC-M710 : Frequency, Mode (USB/LSB/AM), Power (20W/50W/100W), ATU Tune cycle
-  * DTMF control of **talk-through** (//HF transceive//) or  **monitor** (//HF Receive//) functions
-  * Morse Code (CW) revertives over VHF port to read back parameters such as HF radio //frequency, mode, power// etc.
-  * Built in Webserver for status display [[http://gm4slv.plus.com:42109/]]
-  * Python code is [[https://github.com/gm4slv/PythonProjects/tree/master/xgate_m710|here on GitHub]]
-  * X-Gate will run in //dumb talkthrough// mode if Raspberry Pi controller is removed
-A short [[https://youtu.be/Ty5u_6kGX58|You Tube Video]] of the X-Gate in action.
- //[[gm4slv@gm4slv.plus.com|John Pumford-Green]] Wed May  4 17:22:37 2022//
-Page Updated : ~~LASTMOD~~
-{{tag>radio hf vhf python pi xgate}}