DM32 Simultaneous Equations

Try to learn something about everything, and everything about somethingThomas Huxley “Darwin's bulldog” (1824-1895)

Trace: • Radio Topics • Casio GW-M5610 • QRSS • Radio • YaDDNet : New VPS • GM4SLV Allstar 2025 • HF / VHF Xgate • Experiments • QRSS • Land Rover Repairs And Mods

You are here: Make It Tea » Public Area » Calculators » Hints & Tips » DM32 Simultaneous Equations

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<-[[.:start]]


====== DM32 Simultaneous Equations ======

** From the Owners Manual **

===== Statefile =====

Provided by Swiss Micros [[https://technical.swissmicros.com/dm32/examples/STATE/SIMEQ.d32]]

Local copy {{ :public:calculator:guides:simeq.d32 |}}


===== Overview =====

This set of programs allows the solution of 3x3 and 2x2 systems of equations, as well as the inverse and determinate of the matrix representing the coefficients.

The set of equations is represented by a 3 x 4 array of numbers, with the first 3 columns representing the coefficients of the equations and the 4th column the "value" of the equations.

For example

'' Ax + Dy + Gz = J ''

'' Bx + Ey + Hz = K ''

'' Cx + Fy + Iz = L ''

These equations can be represented in matrix form

''
| A D G | | x |   | J |
| B E H | | y | = | K |
| C F I | | z |   | L |

''

This is effectively

'' A x X = B ''

and therefore 

'' X = B / A ''

or 

''X = B x A<sup>-1</sup> ''

The unknown matrix is obtained by multiplying ''B'' by the ''inverse of A''



===== Use =====

Enter the values of the 3x3 matrix and the 3x1 column vector by using prog. A

  * <key>XEQ</key> <key>'A'</key>
  * Enter each value at the prompt followed by <key>R/S</key>
  * Once all values ''A'' -> ''L'' are entered you can 
    * find the determinant of the coefficient matrix with prog ''D'' (not required for a simple solution, but might be useful for other purposes?)
    * find the inverse of the coefficient matrix A with prog. ''I''
      * <key>XEQ</key> <key>'I'</key>
    * Multiply the column vector by this inverse matrix using prog. M
      * <key>XEQ</key> <key>'M'</key>
      * This gives the resulting ''X'', ''Y'' and ''Z'' by pressing <key>R/S</key> to step through them

===== Example =====

''23x + 15y + 17z = 31''

''8x + 11y - 6z = 17''

''4x + 15y + 12z = 14''

<note>

Beware!

You enter each value in sequence going **down the columns** in sequence

Which is the opposite sense to the way matrices are entered in DM15L and DM41X 

</note>

  * <key>XEQ</key> <key>'A'</key>
    * 23 <key>R/S</key>
    * 8 <key>R/S</key>
    * 4 <key>R/S</key>
    * 15 <key>R/S</key>
    * 11 <key>R/S</key>
    * 15 <key>R/S</key>
    * 17 <key>R/S</key>
    * 6 <key>'+/-'</key> <key>R/S</key>
    * 12 <key>R/S</key>
    * 31 <key>R/S</key>
    * 17 <key>R/S</key>
    * 14 <key>R/S</key>
  * Find the inverse <key>XEQ</key> <key>'I'</key>
  * Multiply <key>XEQ</key> <key>'M'</key>
  * Display shows solutions
    * ''X = 0.930622'' <key>R/S</key>
    * ''Y = 0.794258'' <key>R/S</key>
    * ''Z = -0.136364''
  * You can inspect the inverted matrix by running ''A'' again
    * <key>XEQ</key> <key>'A'</key> 
    * ''A ? 0.048'' <key>R/S</key>
    * ''B ? -0.026'' <key>R/S</key>
    * etc....etc...
  * You can re-invert A back to the original state by running prog ''I'' again
  * You can see the determinant of A by running prog ''D''

==== 2x2 ====

The programs expect a 3x3 matrix. If the system is 2x2 you have to use dummy values to pad out to 3x3

Set ''C, F, H, G, L = 0'' and ''I = 1''

e.g.

'' 2x + 3y = 6 ''

'' 8x - 4y = 9 ''

This becomes

'' 2x + 3y + 0z = 6 ''

'' 8x - 4y + 0z = 9 ''

'' 0x + 0y + 1z = 0 ''

and is entered

  * <key>XEQ</key> <key>'A'</key>
    * 2 <key>R/S</key>
    * 8 <key>R/S</key>
    * 0 <key>R/S</key>
    * 3 <key>R/S</key>
    * 4 <key>'+/-'</key> <key>R/S</key>
    * 0 <key>R/S</key>
    * 0 <key>R/S</key>
    * 0 <key>R/S</key>
    * 1 <key>R/S</key>
    * 6 <key>R/S</key>
    * 9 <key>R/S</key>
    * 0 <key>R/S</key>
  * Find the inverse <key>XEQ</key> <key>'I'</key>
  * Multiply <key>XEQ</key> <key>'M'</key> to find the unknowns
    * ''X = 1.59375'' <key>R/S</key>
    * ''Y = 0.93750'' <key>R/S</key>
    * ''Z = 0.00000'' <key>'C'</key>




===== Further Information =====


{{tag>calculator, dm32}}

Page created  : 17/04/26 18:10 BST

Page updated : ~~LASTMOD~~

Navigation

Search

Toolbox