DM41X Hints & Tips - Make It Tea

Try to learn something about everything, and everything about somethingThomas Huxley “Darwin's bulldog” (1824-1895)
Trace: • Icom IC-M710 • SWL Pages • Anytone AT-D878UV • Anytone Smart CB for 10M • DM16L Info • DM15L Non-linear Curve Fit • DM32 Info • DM41L Info • DM41X Ladybug Module • GPO Brass Key
You are here: Make It Tea » Public Area » Calculators » Hints & Tips » DM41X Hints & Tips
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<-[[.:start]]


====== DM41X Snippets ======

===== Module Switching =====

Using the [[dm41x_ladybug_module| Ladybug module]] for Integer/Base calculations means it's impossible to also have the [[41z_module| 41Z complex number module]] or the [[hp16c_emulator| HP16C simulator module]]and the necessary library "plugged in" at the same time. There is a clash between ''Library 4'' needed for ''41z'' (and also needed for ''16C'' if you want to use the //other// integer/base HP16C option) and ''OS/4'' which is needed for ''Ladybug''.

I've used the DM41X "module save/load" function to have different module-plugged states:

  * ''41z.m41'' : with ''41Z 2x2 Deluxe'' and ''Library 4'' modules active
  * ''16c.m41'' : with ''HP16 C Simulator'' and ''Library 4'' modules active
  * ''lady.m41'' : with ''Boost'', ''OS/4'' and ''Ladybug'' modules active
  * ''adv.m41'' : with ''Advantage Pac'' module active


These are accessed via ''setup'' -> ''2. Module'' -> ''4. Load Modules'' -> ''1. Load AM list''

Choosing the required *.m41 file will automatically unplug/plug whichever modules were active when the config. was saved.

This makes it easier to remember which supporting library/module are needed to use each particular module's functions.

It's possible to also save the ''flash'' state - which modules have been pre-loaded into the DM41X's Flash Memory making them //available// to be //plugged in// using different options at the ''setup'' ''2. Module'' choices.... you'll work it out.


===== Advantage Pac : Flag 21 =====

I found that using some of the Advantage Pac programs (e.g. ''MATRX'' or ''CFIT'') would lead to ''AVIEW'' instructions in programs run subsequently to cause a ''HALT'' - requiring use of the <key>R/S</key> key.

I was told via a question on the [[https://forum.swissmicros.com/viewforum.php?f=24 | Swiss Micros Forum ]] that this was likely to be due to the Advantage Pac setting ''FLAG 21'' (printer active) to help in its own presentation of information on the display. 

''FLAG 21'' SET while ''FLAG 55'' is CLEAR (since there's no Printer Module active) causes AVIEW instructions to halt awaiting user intervention (<key>R/S</key> key)

To restore things to //normal// : either ''CLEAR'' Flag 21 via ''CF'' or simply turn the calculator off and on again.

See APPENDIX D in the HP41CX User Manual Volume 2 for a better explanation of the use of Flag 21 to control ''AVIEW'' behaviour.




===== Extended Memory =====

FIXME 

Copy a program to Extended Memory:

  * Put Prog's name in ''Alpha'' register
  * XEQ ''storep''
  * The prog remains in main memory but can be deleted (''CLP'') if memory needed
  * To restore to main memory put name in ''Alpha'' and then ''XEQ'' ''GETSUB''


===== DDAYS =====

**To find the number of days between two dates**


  * enter 1<sup>st</sup> date into Y-stack as ''dd.mmyyyy''
  * key in 2<sup>nd</sup> date into X-stack as ''dd.mmyyyy''
  * <key>XEQ</key> <key>ALPHA</key> <key>D</key> <key>D</key> <key>'A'</key> <key>Y</key> <key>'S'</key> <key>ALPHA</key> 
  * result is the difference in days.
  * ''DDAYS'' can be added to the ''CST'' program chooser to make it easier if multiple calculations are required

==== Example====

Days between 27/2/66 and 31/5/22

''27.021966'' <key>ENTER</key>
''31.052022'' <key>XEQ</key> <key>ALPHA</key> <key>D</key> <key>D</key> <key>'A'</key> <key>Y</key> <key>'S'</key> <key>ALPHA</key>

Result = ''20,547''

Check : 

''365'' <key>÷</key> 

Result ''56.293''

I'm 56 and a bit... sounds right...

===== XYZALM =====

**Various Alarm functions**

Put any message for the Alarm into the ''ALHPA'' register

Load the stack registers with:

  * Z : Repeat Interval ''HHHH.MMSSs'' or ''0'' 
  * Y : Date ''DD.MMYYYY'' or ''0''
  * X : Time ''HH.MMSSs''

Execute ''XYZALM'' to set the alarm

When alarm goes off it is ''acknowledged'' by pressing any key except ''STO''.
 
  * Acknowledging a non-repeating (i.e. ''Z'' was ''0'') alarm cancels it. 
  * Acknowledging a repeating alarm cancels it and re-arms it, adding the ''Repeat Interval'' to create the new alarm time.
  * Pressing <key>STO</key> cancels the alarm but makes it a ''PAST DUE'' alarm.

==== Example ====

Set alarm for 22:20, today, not repeating, called ''Supper''

  * <key>ALPHA</key> <key>'S'</key> <key>U</key> <key>P</key> <key>P</key><key>E</key><key>R</key> <key>ALPHA</key>
  * <key>0</key> <key>ENTER</key> (for Z = repeat interval)
  * <key>0</key> <key>ENTER</key> (for Y = Date = Today)
  * ''22.20'' <key>XEQ</key> <key>ALPHA</key> <key>X</key> <key>Y</key> <key>Z</key> <key>'A'</key> <key>L</key> <key>M</key> <key>ALPHA</key>

At ''22:20'' the alarm is activated. ''ALPHA'' shows ''SUPPER''. 

Alarm is cancelled by pressing //any key but <key>STO</key>//

Pressing <key>STO</key> creates a ''PAST DUE'' alarm which means it gets re-triggered if the calculator is turned off. It can be cancelled and deleted by pressing any key (except <key>STO</key>) and then the calculator will turn off. Pressing <key>STO</key> will create a new Past Due alarm, and allow the calculator to turn off. On turn on the Past Due alarm will still exist and turning off will trigger it again.

A Past Due alarm is useful to remind you that something happened previously and turning the calculator off is a memory-jogger.

''CATALOGUE 5'' ''R/S'' and ''⇑'' ''⇓'' steps through all alarms. 

To clear an alarm from the Catalogue: ''SHIFT'' ''C'' ( where ''C'' is ''√'' on top row )  





--- //John Pumford-Green 31/05/22 13:13//

Page last updated: ~~LASTMOD~~

{{tag>dm41x calculator}}
Navigation

Search

Toolbox
