6502 Project - Make It Tea

Try to learn something about everything, and everything about somethingThomas Huxley “Darwin's bulldog” (1824-1895)

Trace: • HF APRS Mobile/Portable • 6502 Setup • IAX Remote Access • MB7AZE AllStar Config • Radio Clubs • VHF / HF X-Gate Project • 60m Transceiver • site_notice • QMX Two Way QSO • QRSS MEPT

You are here: Make It Tea » Public Area » Computers » Archive » 6502 Project

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<-[[..:start]]
====== 6502 Project ======

===== My New 2022 Project =====

I've never really considered myself to be a programmer. I dabble very badly in Python but I've always been confused by what goes on at the CPU level.

Assembler & Machine Code seem to be where you get to grips with what's really happening.

I'm going to build a small 6502-based computer, with the bare minimum of hardware & features.... CPU, ROM, RAM, I/O and some form of display.

I was going to source the parts myself, but found it impossible to find a supplier with stock of the usual 28C256 EEPROM. I've been watching the excellent You Tube video series by Ben Eater:

[[https://youtube.com/playlist?list=PLowKtXNTBypFbtuVMUVXNR0z1mu7dp7eH]]

Ben supplies a kit with everything needed to build the basic computer - just add a PSU and an EEPROM programmer - so I've bought one of his kits.

[[https://eater.net/6502]]


I've ordered a TL866 programmer from Amazon as well as a well-regarded book ''Programming the 65816: Including the 6502, 65C02, and 65802''



<catlist -nohead -sortByTitle>

Navigation

Search

Toolbox