John's Vademecum

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<-[[.:start]]


====== Linux Serial Console ======

** To configure Debian 11 for a serial console **

{{:public:computers:img_20220930_120938_557_1.jpg?400|}}
{{:public:computers:img_20220930_120917_052_1.jpg?400|}}

===== Grub =====

Edit ''/etc/default/grub'' to add the console setting to the end of 

  GRUB_CMDLINE_LINUX_DEFAULT="quiet splash resume=UUID=d6a8791e-201a-4207-99e1-eafadec6713f console=ttyS0,19200n8"
  
Then update grub to use the new setting.

  sudo update-grub

Once the ''systemd'' changes are made it's worth rebooting to see that the boot process appears on the console.


===== systemd =====

<code>
sudo systemctl enable serial-getty@ttyS0.service
sudo systemctl start serial-getty@ttyS0.service
</code>


--- //John Pumford-Green 30/09/22 11:59//


===== Further Information =====

Using some old text mode software again....

  * email with [[Alpine]]


{{tag>}}