public:computers:6502:goals
Table of Contents
Goals
What do I want to achieve
Phase One
Follow Ben Eater's 6502 Tutorials and become familiar with the mechanism of programming the 6502Adapt some of the code to gain experience at modifying 6502 assembly code- make some mini code projects to get experience of handling input, output and interrupts
Phase Two
add key-pad for simple user inputwrite simple ''monitor'' firmware to gain experience with user i/o etc.- add serial port hardware and enough software to send/receive RS232 to/from a terminal
- write routines for LCD display of RS232 data received
- investigate using additional VIA port(s) to interact with external hardware
refine hardware design and move OFF breadboard onto more permanent hardware (vero/perf board etc)- investigate parsing and reacting to input via RS232, beyond simply receive/transmit and display - interact with the machine!
Phase Three
- specific projects - e.g. DSC, Selcall etc
- keep an open mind and keep learning new techniques….
- this phase will largely depend on what is learned earlier….
— John Pumford-Green 15/08/22 09:23
Further Information
public/computers/6502/goals.txt · Last modified: 27/08/22 14:59 BST by 127.0.0.1