public:calculator:guides:dm15l_start
This is an old revision of the document!
Table of Contents
DM15L Startup Keys & Serial Console
Start Keys
- The DM15L has a few options which are set by holding certain keys at power on
| Key | Function description |
|---|---|
| A | Display time/date for 5 minutes |
| B | Benchmark. Evaluate speed compared to original calculator |
| C | Switch to serial console |
| E | System info. Firmware version, battery voltage, current frequency, etc. |
| CHS | Change LCD contrast.1) |
| EEX | Reset LCD contrast to default values. |
| STO | Adjust RTC: decrement -1h |
| RCL | Adjust RTC: increment +1h |
| 7 | Cycle through available fonts |
| 9 | Configure CPU speed. Toggle between 12MHz and 48MHz |
| ÷ | Keyboard self test |
| ⨯ | Self test |
| − | Power reset |
| + | Endless test |
| . | Toggle decimal delimiter |
| SST | Time/date adjustment.2) |
| GTO | Toggle annunciator position |
Serial Console
Settings
- Speed : 38400
- Data bits : 8
- Stop bits : 1
- Parity : None
- Flow control : XON/XOFF (or none)
Commands
VOYAGER >> ? Firmware DM15_M80_V32 ? Help p Key press s Dump memory l Load memory ct Console timeout bootloader Invoke Bootloader t Get time ts Set time td Update time kb Toggle keyboard output to console d Toggle display output to console b Read battery voltage Type '<command> ?' for params VOYAGER >>
Page Info
Page created Thu May 26 17:41:19 2022 by John Pumford-Green
Page last updated: 06/03/25 06:49 GMT
public/calculator/guides/dm15l_start.1653583994.txt.gz · Last modified: 06/03/25 06:49 GMT (external edit)