public:radio:radio_database:xeigu_g90
This is an old revision of the document!
Table of Contents
Xeigu G90
Documentation
Firmware Upgrade process
Use TeraTerm and “blue USB Serial adaptor”
Set TerraTerm to 115200 8n1 and the appropriate COM port
Plug to Main unit COM port
- Hold SPACE and power-on G90
- Choose “1. Update F/W”
- After “Erase” select F/W file to send in TerraTerm via “File → Transfer → XMODEM → Send
- check the “1k” box
- Power off Radio after transfer completes
- Move to Front Panel COM port
- Hold SPACE and power-on G90 again
- repeat process to upgrade front panel
- Once complete depower radio.
- Wait 5 seconds (remove COM connection)
- Repower.
Firmware
| Date | Firmware Version | Firmware Files | |
|---|---|---|---|
| 12/5/23 | 1.79b03 | g90fw_v1.79_fw_v1.79b03_221026.zip | new IF Filter adjust method - not intuitive |
| 12/5/23 | 1.78b01 | g90_fw_v1.78b01-20220119.zip | downgraded - not sure of new Bandwidth method |
| 12/5/23 | 1.79b03 main / 1.80 display | g90_fw_1.80disp.zip | Display → 1.80 fixes C-IV bugs. Main Unit on 1.79b03. Trying to adapt to new IF bandwidth method |
| 14/5/23 | 1.78b01 | g90_fw_v1.78b01-20220119.zip | Downgraded again, old filter adjustment method much better, but clicks on audio on string signals |
| 14/5/23 | 1.77b | xiegu_g90_fw_v1.77b.zip | to best compromise version (so far) |
Page created Wed May 25 00:00:02 2022 by John Pumford-Green
Page last updated: 06/03/25 06:49 GMT
tags
public/radio/radio_database/xeigu_g90.1684078589.txt.gz · Last modified: 06/03/25 06:49 GMT (external edit)